Anti-Corrosive Rotary Tube Furnace_Zhengzhou Kejia Furnace

Anti-Corrosive Rotary Tube Furnace

Model：KJ-800X-III-R2

Description：

KJ-800X-III-R2 is a three zones rotary tube furnace designed for use with strong corrosive gases such as HCL and CH4. The processing tube is made of the double-layer structure of quartz and SS310S and the flange is made of PETF and anti-corrosive rotatio

Specific Introduction:
KJ-800X-III-R2 is a three zones rotary tube furnace designed for use with strong corrosive gases such as HCL and CH4. The processing tube is made of the double-layer structure of quartz and SS310S and the flange is made of PETF and anti-corrosive rotation fixture, which allows the rotary furnace working at max. 800oC at 3 bar pressure.
Parameters:

Furnace Construction	Special design processing tube with a double-layer structure, which allows furnace running HCL corrosive gas at 3 bar pressure up to 800°C （Please refer the Pic left) The sealing flanges are made of PTFE and the rotating fixture is made of anti-corrosive steel with Teflon coating. Three heating zone rotary furnace with max. the working temperature of 800ºC @ +/- 1oC accuracy.
Heating Zone length	Three heating zones: each zone length: 150 + 300 + 150 (mm) total heating zone length 600 mm Constant temperature zone: 300 mm within +/- 2oC if three zones at the same temperature.
Processing tube & Sealing Flange	The double-layer structure which has inside quartz tube and outside SS310A high-temperature stainless steel. Quartz tube size: 52mm ID x 60 mm OD x 1400mm L, SS310S tube: 62 mm ID x 70mm OD x 1300 mm L Sealing flanges, gas fittings and valves are made of PTFE Anti-corrosive Magnetic Fluid Sealed Swivel Coupling
Vacuum Level:	10 - 2 torr by the mechanical pump 10 - 4 torr by a turbopump
Max. Working Temperature & Working Pressure	800°C for continuously and 900 °C Max for < 1 hour Max. working pressure 3 bars Max. Vacuum: 4.5x10-2 torr (<0.1mtorr/s leaking rate)
Heating Rate	Recommend: 10 °C/min
Temperature Controllers	Three PID digital temperature controller with 30 segment programmable, +/- 1°C
Thermocouple	Three Omega K type 3mm OD x 6" L with high-temperature tolerance (220°C) connector
Tube rotating Speed	0 - 10 RPM variable
Furnace tilt angle	0~30° via the electric motor
Power	208 - 240V single phase (30 A Breaker required) 50/60Hz 5 KW Max
Warranty	One-year limited warranty (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order the replacement at related products page.)
Compliance	CE Certified NRTL (UL61010) or CSA certification is available at extra cost.
Furnace dimension:	1725 L x 590 W x 1460 H ( mm)
Product net weight	100Kg
Shipping dimension	49" x 40" x 70"
Shipping weight	450 lbs